Need to use salt water ice (jargon called dosing) as the number of volume, to see how much ice volume modulated pump (piston pump) automatically adjusted. Ice-making machine of the main chamber two chamber in vitro of a certain density of brass plate, technical terms is called (evaporation chamber) is saying something about the cooling. Outside the chamber is a stainless steel chamber round the rules of a leaf blade and the center of the inner wall of the distance can be adjusted is generally 3 mm, the blade on the top of several groups of evenly distributed copper nozzle.
Refrigerator works
The chilled water storage tank with a pump constantly circulating through the plate or sub frame evaporator; compressor after the operation by suction - Compression - Exhaust - condensation (liquefaction) - throttle - and then in the evaporator to -10 to - 18 degrees of temperature evaporation endothermic vaporization. chilled water temperature at 0 degrees constantly in a more low-temperature evaporator surface condenses into ice when the thickness of the ice condensation to a certain time, the evaporation temperature of refrigerant temperature the set temperature, the solenoid valve connected to defrost heat pump is often used form of de-icing, and then to achieve the next cycle.
Ice-making cycle
Add water through the valve, the water automatically into a water storage tank, and then by the flow control valve will be sent to the diversion of water through the pump head where water spray evenly on the surface of the ice, the same as the flow through the ice curtain control of the wall, the water is cooled to freezing point, without being frozen water will evaporate through the porous slot into the storage tank, re-start the cycle work.
Ice mining cycle
When the ice reached the required thickness (thickness by the operator / user choose), the hot air from the compressor lead back to the ice maker to re-clip wall, replace the low-temperature liquid refrigerant. So that the ice wall and evaporation to form a layer of water between the film, this layer of water film in the role of ice-free by gravity down into the following time slot, play the role of lubrication. In the mining cycle in the ice water will be produced by water storage tank through the porous slot back, this also prevents the machine wet ice is discharged.
Refrigerator condenser
There are air-cooled, water-cooled or evaporative condensers to achieve. Evaporative be installed in place above the ice machine, water-cooled condenser was installed in the ice machine refrigeration system below or below, while the air-cooled condenser can be installed in accordance with the actual situation together with the ice machine installation can also be installed outdoors. If necessary, water-cooled condenser can be used in the ship or the coast, using sea water for cooling. Evaporative cooling can be used in ambient air temperature is higher, but the efficiency and economic point of view, not suitable for water-cooled or air-cooled under the conditions of use.
All Pro corporation is a medical products supplier, If needed to please to contact with us.